ผลการค้นหา

คำศัพท์/สำนวน บทความ  หาอะไรก็เจอ!
ค้นเจอ 17 รายการ

 หรือคุณกำลังค้นหา diameter, Slump Cone, Dry Rodded Weight, Addendum, pitch diameter, Bearing Strength, Adapters

diameter

แปลว่าเส้นผ่าศูนย์กลาง, เส้นผ่านศูนย์กลางของวงกลม

N
 EN-TH Dictionary

Slump Cone

แปลว่า(Concrete Engineering) A metal mold in the form of a truncated cone with a top diameter of 4”, a bottom diameter of 8”, and a height of 12”, used to fabricate the specimen for a slump test.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Adapters

แปลว่า(english) Steel segments that are bolted to the reel mandrel to increase their diameter so that large (24" ID) coils can be run.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Z-Mill

แปลว่า(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Brown Sharp Gages

แปลว่า(english) A standard series of sizes refered to by numbers, in which the diameter of wire or thickness of sheet metal is generally produced and which is used in the manufacture of brass, bronze, copper, copper-base alloys and aluminum. These gage numbers have a definite relationship to each other. In this system, the decimal thickness is reduced by 50% every six gage numbers- while temper is expressed by the number of B&S gage numbers as cold reduced in thickness from previous annealing. For each B&S gage number in thickness reduction, where is assigned a hardness value of 1/4 hard.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Brinell Hardness Testing

แปลว่า(english) Method of determining the hardness of materials; involves impressing a hardened ball of specified diameter into the material surface at a known pressure (10-mm ball, 500-kg load for aluminum alloys). The Brinell hardness number results from calculations involving the load and the spherical area of the ball impression. Direct-reading testing are generally used for routine inspection of forgings, and as a heat treat control function.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Rod (tamping) (ASTM C24l)

แปลว่า(Concrete Engineering) A round, straight steel rod, 5/8' in diameter and approximately 24' in length, having the tamping end rounded into a hemispherical tip, the diameter of which is 5/8'.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Mixing Speed

แปลว่า(Concrete Engineering) Rate of mixer drum rotation or that of the paddles in a pan, open-top, or trough type mixer, when mixing a batch; expressed in revolutions per minute (rpm) or in peripheral] feet per minute of A point on the circumference at maximum diameter.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

diameter

แปลว่าเส้นผ่านศูนย์กลาง

N
 EN-TH Dictionary

Addendum

แปลว่า(english) That portion of a gear tooth that extends from the pitch circle to the outside diameter.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

diameter

แปลว่าเส้นผ่านศูนย์กลาง
 ศัพท์ช่างภาษาอังกฤษ – ไทย

pitch diameter

แปลว่า( เฟือง ) เส้นผ่าศูนย์กลางวงคาดของล้อเฟือง
 ศัพท์ช่างภาษาอังกฤษ – ไทย